Item #: WQ60C73
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Revised 09/2010
General Assembly Guidelines
I.
Ensure that all parts and hardware are available before beginning assembly.
Follow each step carefully to ensure the proper assembly of this product.
Two people are recommended for ease in the assembly of this product.
II.
III.
IV.
The four main types of hardware used to assemble this product are: wood dowels,
cam bolts and locks, bolts and screws.
V.
The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI.
A Phillips head screwdriver is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
P.2
Hardware List
Wood dowel
Cam bolt
Cam lock
Door stopper
Medium screw
Door stopper plate
Small screw
Handle
Small bolt
Door hinge
Extra-large screw
Shelf support pin
Plastic wedge
Large screw
Large bolt
Wrench
Glue tube
Sticker
Screw cam bolts (B) into stand top (1). Attach door stoppers (D) to stand top (1) using medium screws
(E).
Screw cam bolts (B) into panels (3,4,5,6). Insert dowels (A) into panels (3,4,5,6), slat (7) and shelves
(9).
Screw cam bolts (B) into panels (14,15,17,18). Insert dowels (A) into panels (14,15,17,18) and shelves
(12,13).
Screw cam bolts (B) into panels (5,6) and slat (20). Insert dowels (A) into slats (20,22,23).
Attach slats (22,23) to slat (20) using cam bolts as guides. Insert cam locks (C) into slats (22,23) and
tighten with a screwdriver.
Screw cam bolts (B) into panels (16,19). Attach handles (H) to panels (16,19) using small bolts (J).
Attach door stopper plates (F) to panels (16,19) using small screws (G).
Attach panels (14,15) to shelves (12,13) using cam bolts and dowels as guides. Insert cam locks (C)
into shelves (12,13) and tighten with a screwdriver. Note that two cam locks (C) will be inserted into
each shelf (12,13).
Attach panels (17,18) to shelves (12,13) using cam bolts and dowels as guides. Insert cam locks (C)
into shelves (12,13) and tighten with a screwdriver. Note that two cam locks (C) will be inserted into
each shelf (12,13).
Attach the panel (14,15) assembly to panel (16) using cam bolts and dowels as guides. Insert cam
locks (C) into panels (14,15) and tighten with a screwdriver.
Attach the panel (17,18) assembly to panel (19) using cam bolts and dowels as guides. Insert cam
locks (C) into panels (17,18) and tighten with a screwdriver.
Attach panels (5,6) to slat (7) using cam bolts and dowels as guides. Insert cam locks (C) into slat (7)
and tighten with a screwdriver.
Attach shelf (9) to the panel (5,6) assembly, then attach panel (3) to shelf (9) using cam bolts and
dowels as guides. Insert cam locks (C) into shelf (9) and tighten with a screwdriver.
Attach shelf (9) to the panel (5,6) assembly, then attach panel (4) to shelf (9) using cam bolts and
dowels as guides. Insert cam locks (C) into shelf (9) and tighten with a screwdriver.
Attach the panel (3,4,5,6) assembly to stand top (1) using cam bolts and dowels as guides. Insert cam
locks (C) into panels (3,4,5,6) and tighten with a screwdriver. Note that two cam locks (C) will be
inserted into each panel (3,4,5,6).
Slide back panels (10,11) into the appropriate grooves at the back of the stand assembly.
Attach feet (21) to stand base (2) using large bolts (Q) and wrench (R).
Attach stand base (2) to the stand assembly using large bolts (Q) and wrench (R).
Attach the slat (20,22,23) assembly to stand base (2) using cam bolts and dowels as guides.
Attach door hinges (K) to panels (15,17) using extra-large screws (L).
Attach the panel (14,15) assembly to the stand assembly at door hinges (K) using extra-large screws
(L).
Attach the panel (17,18) assembly to the stand assembly at door hinges (K) using extra-large screws
(L).
Insert shelf support pins (M) into the stand assembly at desired shelf heights. Carefully place shelves
(8) onto shelf support pins (M). Note that there will be two shelf support pins (M) on either end of each
shelf (8).
Secure back panels (10,11) using plastic wedges (N) and large screws (P).
|
Texas Instruments Drums DAC7716EVM User Manual
Toshiba CRT Television 32A43 User Manual
Toshiba Switch TS Series User Manual
Traulsen Refrigerator UHT27 User Manual
TRENDnet Network Hardware TPL406E User Manual
Unisys Server NX5820 User Manual
Universal Carbon Monoxide Alarm CD 9775 User Manual
UTStarcom Cell Phone CDM8945 User Manual
Waring Oven RO18B User Manual
Weed Eater Edger 545186731 User Manual