Quick Start
Quick Reference Setup Guide
CLUB-6800
This quick reference guide is provided to help you set up your
CLUB-6800 system for the first time. It contains instructions
on setting up the products that are included in the CLUB-
6800. If you are connecting any additional gear that is not
included in the CLUB-6800, refer to the appropriate manuals
for detailed instructions.
Gathering Package Contents
The first step to putting together your new CLUB-6800 system is unpacking all of the necessary equipment. Remem-
ber to keep your manuals nearby when setting up, as you may need to reference them. The products listed below are
included in the CLUB-6800 system:
CDG-9000 PRO
• [1] Instruction Manual
SS-88 Speaker Stands
• [2] SS-88 speaker stands
KJM-8000 PRO Digital Key Control Karaoke Mixing Board
• [1] Instruction Manual
CLUB-8 Road Case
• [1] CLUB-8 road case
• [1] Rolling cart
• [2] MK-38 PRO microphones
• [1] Gooseneck DJ light
• Rack-mounting screws
VP-600 PRO 600W Professional Power Amplifier
• [1] Instruction Manual
VX-15 Vocal Speakers
• [2] VX-15 speakers
Mounting components into the CLUB-8
Below is one way to configure your CLUB-6800:
Follow these basic guidelines when mounting:
• Always screw in the mounting screws using an “X” forma-
tion.
• If possible, to keep the products cooler, leave some space in
between the components in the rack.
1
3
4
CDG-9000 PRO CONTROLLER
KJM-8000 PRO MIXER
2
CDG-9000 PRO PLAYER
VP-600 PRO AMPLIFIER
On the web at www.vocopro.com
or call toll free 1-800-678-5348
CDG-9000 PRO player unit to KJM-8000 PRO
2
You have the option of either connecting each deck of the CDG-9000 PRO separately (Fig. 1) or together through a single
SWITCHED output (Fig. 2).
Separately through individual deck outputs (Fig.1)
Using RCA cables:
1. For each deck, connect the L/R (red & white) audio outputs and Video (yellow) output on the CDG-9000 PRO to the
CDG(1) and DVD(3) inputs on the rear panel of the KJM-8000 PRO
CDG-9000 PRO Player
CDG(1)
DVD(2)
CDG(1)
DVD(2)
KJM-8000 PRO Mixer
CDG-9000 PRO Player
LD(3)
LD(3)
Together through SWITCHED output (Fig. 2)
Using RCA cables:
1. Connect the L/R SWITCHED audio and
SWITCHED video outputs on the CDG-9000
PRO player to the CDG(1) audio input on the
KJM-8000 PRO
CDG(1)
DVD(2)
KJM-8000 PRO Mixer
LD(3)
KJM-8000 PRO to VP-600 PRO
3
You can do this using either XLR(f) to XLR(m) cables or XLR(f) to ¼”(m) cables. Below are instructions for each.
Using two XLR(f) to XLR(m) (Fig.1)
Using two XLR(f) to ¼”(m) (Fig. 2)
1. Connect the XLR(f) end to the LEFT MASTER AUDIO
XLR output on the KJM-8000 PRO and the XLR (m) end
to the left XLR audio input on the VP-600 PRO.
2. Now do the same thing except now go from the RIGHT
MASTER AUDIO XLR output on the KJM-8000 PRO and
the right XLR audio input on the VP-600 PRO
1. Connect the XLR(f) end to the LEFT MASTER AUDIO XLR
output on the KJM-8000 PRO and the ¼”(m) end to the CH.
B ¼” audio input on the VP-600 PRO.
2. Now do the same thing except now go from the RIGHT
MASTER AUDIO XLR output on the KJM-8000 PRO and the
CH. A ¼” audio input on the VP-600 PRO.
BRIDGED
OUTPUTS
BRIDGED
OUTPUTS
STEREO 300W
STEREO 300W
PER CHANNEL
PER CHANNEL
INTO
4
OHM
INTO
4
OHM
BALANCED
VP-600 PRO Amplifier
KJM-8000 PRO Mixer
600W MONO
BRIDGED INTO
BALANCED
600W MONO
BRIDGED INTO
8
OHM
8
OHM
CH.
B
CH.
A
MONO
CH.
B
CH.
A
CH.
B
CH.
A
MONO
CH.
B
CH.
A
MONO
BRIDGE
STEREO
MONO
BRIDGE
STEREO
INPUTS
MODEL VP-600 PRO
INPUTS
MODEL VP-600 PRO
CDG(1)
DVD(2)
CDG(1)
DVD(2)
LD(3)
LD(3)
VP-600 PRO to VX-15 speakers
4
VP-600 PRO Amplifier
Using two 9’ MDP (Banana Plug) to ¼” speaker cables
1. Connect the MDP end to CH.B on the rear panel of the
VP-600 PRO and
BRIDGED
OUTPUTS
STEREO 300W
PER CHANNEL
INTO OHM
4
BALANCED
600W MONO
BRIDGED INTO
8
OHM
CH.
B
CH.
A
MONO
CH.
CH.
MONO
BRIDGE
STEREO
2. Connect the ¼” end to one of the two VX-15’s.
3. Repeat this for the second speaker, except now connect
the MDP end to CH. A on the VP-600 PRO.
INPUTS
MODEL VP-600 PRO
VX-15 Speaker #1
VX-15 Speaker #2
Connecting Microphones to the KJM-8000 PRO
5
Using either a mic cable with two XLR ends (Fig. A) or an XLR to ¼” cable (Fig. B):
Connect the microphone cables to the MIC inputs on the rear panel of the KJM-8000 PRO.
CDG(1)
DVD(2)
CDG(1)
DVD(2)
KJM-8000 PRO Mixer
LD(3)
LD(3)
Adding the VSP-M1 to the CLUB-6800 system
6
Using either a mic cable with two XLR ends or an XLR to ¼” cable:
1. Connect the XLR(f) end to the LEFT BALANCED OUTPUT on the rear panel of the VSP-M1.
2. Connect the XLR(m) or ¼” end to MIC input 1 on the rear panel of the KJM-8000 PRO.
3. Follow the above steps, now going from the RIGHT BALANCED OUTPUT on the VSP-M1 to MIC input 2 on the rear panel
of the KJM-8000 PRO.
4. Connect the mics to the mic inputs on the rear panel of the VSP-M1.
VSP-M1 Processor
CDG(1)
DVD(2)
KJM-8000 PRO Mixer
LD(3)
|
Technics Car Amplifier SU 810 User Manual
Tektronix Car Amplifier 5A18N User Manual
Thule Automobile Accessories 079 User Manual
Toastmaster Hot Beverage Maker 596P User Manual
TRENDnet Router TEW 659BRV User Manual
Tripp Lite Switch U222 007 R User Manual
Univex Mixer ME130 User Manual
Univex Scanner NeatDesk User Manual
Viking Range F20537 User Manual
VTech Baby Gym Smart Key User Manual