ViewEra Flat Panel Television V200T User Manual

TFT-LCD TV MONITOR  
V200T  
USERS MANUAL  
Rev 1.1  
Page 1  
 
1. Introduction  
1.1 Product Description  
Congratulations on your purchasing ViewEra LCD monitor. It incorporates high  
quality display into a small light weighted module. It has power-saving capabilities  
and emits no radiation. You will certainly benefit from this monitor in lots of ways;  
to name some of them: comfort, safety, and environmental protection.  
This LCD monitor incorporates 20.1" color active matrix thin-film-transistor  
(TFT) liquid crystal display to provide superior display performance. Its maximum  
resolution of 20.1" SVGA 800×600 is ideal for displaying complex graphics and  
high definition images. Its other outstanding capabilities include audio system and  
OSD (On Screen Display) controls.  
1.2 Package Contents  
Included with your LCD monitor as following items  
1. 20.1" TFT LCD monitor  
2. 15 pin D-sub signal cable  
3. Line Sound Card Cable  
4. AC power cable  
5. Adaptor  
6. Users manual  
7. Remote control  
Page 3  
 
1.3 Product Features  
1. High contrast color TFT LCD display support resolution up to  
20.1" SVGA 800 ×600@75Hz  
2. Compatible with IBM VGA, IBM SVGA, and Macintosh standards.  
3. Imbedded audio system provides sound performance.  
4. AV-In and S-video, Component (Option)  
5. Power management system conforms to VESA DPMS standard.  
6. Support DDC 1/2B for Plug & Play compatibility.  
7. Advanced OSD control for picture quality adjustment.  
8. Detachable stand for wall-mounting application.  
1.4 Screen cleaning techniques  
1. Gently clean the screen with a clean camel hair lens brush, or a soft, clean,  
lint-free cloth, to remove dust and other particles that can scratch the screen.  
2. Do not apply pressure to the screen surface when wiping it clean.  
3. Do not pour or spray any liquid directly onto the screen or casing. Chemical  
cleaners have been reported to damage the screen or case of the LCD monitor.  
Page 4  
 
1.5 Additional  
Read all of these instructions and save them for later use.  
Follow all warnings and instructions on the product.  
1. Product  
Do not cover block the vent holes in the case.  
Do not insert sharp objects or spill liquid into the LCD monitor  
through cabinet slots. They may cause accident fire, electric shock or  
failure.  
Disconnect the power plug from the AC outlet if you will not use it for an  
extended period of time.  
Do not attempt to service this product yourself, as opening or  
removing covers may expose you to dangerous voltage points or other  
risks.  
Do not touch the screen directly with your fingers. You may damage the  
screen, and oil from your skin is difficult to remove.  
Do not apply pressure to screen. The LCD is very delicate.  
2. Power  
Use the type of power indicated on label.  
3. Plugs  
Do not remove any of the prongs of the monitors three-pronged power  
plug.  
Disconnect the power plug from the AC outlet under following conditions:  
If you will not use it for an extended period time.  
When the power cord or plug is damaged or frayed.  
If the product does not operate normally when the operating instructions  
are followed. Adjust only those controls that are covered by the  
operating instructions. Improper adjustment of other controls may result  
in damage and will often require extensive work by a qualified  
technician .  
If the product exhibits a distinct change in performance, service may be  
required.  
Page 5  
 
4. Power and extension cords  
Do not allow anything to rest on the power cord.  
Do not locate this product where persons will walk on the cord.  
Use the proper power cord with correct attachment plug type. If the power  
source is 120V AC, use a power cord that has UL and C-UL approvals, If the  
power source is a 240V AC supply, use the tandem (T blade) type attachment  
plug with ground conductor power cord that meets the respective European  
countrys safety regulations, such as VDE for Germany.  
Do not over load wall outlets or power cords. Ensure that the total of all  
units plugged into the wall outlet does not exceed 10 amperes.  
Ensure that the total ampere ratings on all units plugged into the extension  
cord is not above the cords rating.  
If the power supply cord, which came with your monitor, is to be connected  
to the PC instead of the wall outlet, Use an UL/TUV approved computers  
with receptacle rated 100~240V AC, 50/60Hz, 1.0A(minimum) only.  
5. Environment  
Place the monitor on a flat and leveled surface.  
Place the monitor in a well-Ventilated place.  
Keep the monitor away from:  
Overly hot, cold or humid places, places directly under sunlight, dusty  
surroundings, equipment that generate strong magnetic fields.  
Please adjust the frequency to 75 Hz after setting up the LCD monitor.  
Then push the OSD menu button and use the Auto Adjust function to find  
the best mode of your computer.  
Page 6  
 
2. Control Functions  
2.1 Control Button Front View PC Mode】  
1
2
3
4
5
6
7
8
1. Source Select :  
Direct select the input signal PC / AV /  
S-Video / YCbCr .  
2. NO Function  
3. Auto Adjust :  
Adjust CLK , Phase, H/V-Position  
automatically.  
4. OSD menu / select :  
Pressing this button pops up the OSD menu  
on the screen Add used to select the OSD  
control options on the screen.  
5. Adjust (decrease ) :  
This button is used to adjust the decreasing  
value of selected.  
6. Adjust (increase ) :  
This button is used to adjust the increasing  
value of selected.  
7. Mute :  
This button is used to volume Mute.  
Power switch.  
8. Power Switch :  
Page 7  
 
Monitor Function Selection Menu:  
Auto Select this function to obtain the best display  
efficiency.  
BrightnessAdjust the brightness using and button.  
ContrastAdjust the contrast using and buttons.  
Clock:  
Adjust the clock using and buttons.  
Phase:  
Adjust the phase using and buttons.  
Horizontal Pressing moves the display image to  
Positionright ;Pressing moves the display image to  
left.  
Vertical  
Pressing moves the display image upward ;  
PositionPressing moves the display image down ward.  
Page 8  
 
Color Temperature and RGB Adjusting Menu :  
Color  
Color Temperature Select.  
Temperature  
Red:  
Red range adjustment  
Green range adjustment  
Blue range adjustment  
Green:  
Blue:  
Page 9  
 
Tools Menu  
VolumeAdjust the volume using and buttons.  
MuteMute function.  
ResetReset function.  
InputPC→AV→S-Video→ Y, Cb, Cr selection  
Page 10  
 
OSD Function Selection Menu:  
Exit OSD:  
Exit the OSD function selection menu.  
OSD-H- PositionPressing moves the OSD to right ;  
Pressing moves the OSD menu to  
left.  
OSD-V-PositionPressing moves the OSD menu  
upward; Pressing moves the OSD  
menu downward.  
OSD DURATIONSet the OSD display time.  
LANGUAGE:  
Set the OSD display language.  
Page 11  
 
2.2 Control Button Front View AVMode】  
1
2
3
4
5
6
7
8
1. Source Select : Direct select the input signal PC Pressing this button pops up  
/ AV / S-Video / YCbCr .  
the OSD menu on the screen  
And used to select the OSD  
control options on the screen.  
2. NO Function:  
3. NO Function:  
4. OSD menu / select :  
5. Adjust (decrease ) :  
This button is used to  
decrease the value of selected  
function.  
6. Adjust (increase ) :  
This button is used to  
increase the value of selected  
function.  
7. Mute :  
This button is used to mute  
speaker volume.  
8. Power Switch :  
Power switch  
Page 12  
 
Monitor Function Selection Menu:  
BrightnessAdjust the brightness using and button.  
ContrastAdjust the contrast using and buttons.  
SaturationAdjust the Saturation using and buttons.  
TINT:  
Adjust the Tint using and buttons.  
SharpnessAdjust the Sharpness using and buttons.  
Page 13  
 
Tools Menu:  
VolumeAdjust the volume using and -  
buttons.  
MuteMute function.  
ResetReset function.  
InputPC→AV→S-Video→YCbCr select.  
Page 14  
 
OSD Function Selection Menu:  
Exit OSD:  
Exit the OSD function selection menu.  
OSD -H- PositionPressing moves the OSD to right ;  
Pressing moves the OSD menu to  
left.  
OSD-V-PositionPressing moves the OSD menu  
upwards; Pressing moves the OSD  
menu downwards.  
OSD DURATIONSet the OSD display time.  
LANGUAGE:  
Set the OSD display language.  
Page 15  
 
3. Inputs Diagram  
Inputs  
AV】  
(1) (2) (3) (4) (5)  
(6)  
(7)  
1DC IN:  
2AV IN:  
3S-VIDEO IN:  
4LINE OUT:  
5RCA JACK:  
AUDIO IN  
DC power input from adaptor.  
RCA jack AV signal input.  
S-Video signal input.  
Sound signal output (Stereo Phone Jack).  
Audio signal R/L input.  
6VGA IN (PC IN)Connect to PC VGA D-Sub signal.  
7Component INComponent in Y, Cb, Cr.  
Page 16  
 
4. Setup  
Electrical Connection  
Please follow the instruction below to properly connect the LCD monitor to  
external electrical source.  
1. Connect the female-end of the power cable to the transformer. Connect the  
male-end of the power cable to the wall outlet or extension cable.  
2. Connect the cable from the other end of the transformer to the LCD monitor  
located at the back near the VGA signal cable.  
Signal Connection  
1. Power off both the LCD monitor and PC system before connecting them.  
2. Take out the VGA cable from the box, then connect it to the signal connector at  
the back of the LCD monitor.  
3. Connect the other end to the VGA connector on the back of the PC system.  
4. Please make sure the connections to both the PC system unit and the LCD  
monitor is strong and secure. Please dont forget to tighten the screws on each  
connector end.  
5. Now turn on both the PC system unit and the LCD monitor.  
6. After you finish setting up the LCD monitor, please set the refresh rate to 75Hz.  
7. After setting up the LCD monitor, please perform Auto Adjust in OSD so that  
the LCD monitor will be automatically set to optimal color display each time.  
* Please note: When you disconnect any power cable or signal cable, please do not  
pull the cable by grabbing the cable body. Please grab the cable connector itself  
whenever you try to pull the cable during disconnect.  
Page 17  
 
5. Viewing Angles  
Tilting  
For better viewing angle, you may tilt the LCD monitor forwards(up to 10  
degrees) or backwards (up to 25 degrees).  
Down10 o  
Up25 o  
Page 18  
 
6. Product Specifications  
20.1Product Specification  
Type  
Spec  
LCD Display  
Pixel Pitch  
Max.  
Resolution  
Set Size  
Pack Size  
AV  
20.1" Active matrix TFT LCD panel  
0.51(H) × 0.51(V) mm  
800(H) × 600 (V) SVGA  
595(H) × 430(W) × 190(D) mm  
695(H) × 675(W) × 275(D) mm  
Contrast Ratio 500:1  
Brightness  
Response  
Time  
500 cd/m2  
Tr 6 ms ; Tf 16ms (typ)  
Display Color 16.777M  
View Angle  
PC Interface  
Video Sync.  
L+/R- ±80° U+/D- ±60°  
RGB analog 0.7V peak to peak  
TTL positive or negative  
Display Mode VGA, SVGA  
PC Audio in /  
Audio out  
Video  
RCA JACK(R/L) /  
Phone Jack  
RCA Jack/ Mini Dine  
Connector  
Frequency  
Signal  
(Hor.) 31.5-48KHz (Ver.) 56-75Hz  
D-sub 15 pin  
Connector  
Front Control  
Source select , CH down , CH up, Menu ,  
Adjust +,, Mute ,Power.  
OSD Menu  
Contrast, Brightness, Auto Adjust, Clock,  
Phase, H-Position, V-Position.  
AC Input : 100-240V~1.8A, 50-60Hz  
DC Output : 12V/ 5.0A  
Power  
Adapter  
Operating  
Conditions  
Storage  
Conditions  
Certification  
Weight  
Temperature: 0~40℃  
Humidity : 20% ~ 85%  
Temperature: -20~60℃  
Humidity : 10%~95%  
BSMI, FCC (DOC), CE-B, UL, TUV/GS  
Net8.5Kgs, Gross14Kgs  
Page 19  
 
7. Display Modes  
H Freq  
(kHz)  
V Freq  
(Hz)  
H Freq  
(kHz)  
V Freq  
(Hz)  
Resolution  
Resolution  
1
2
3
4
5
640 ×350  
640 ×480  
640 ×480  
640 ×480  
720 ×400  
31.469  
31.469  
37.861  
37.500  
31.469  
70.070  
59.940  
72.809  
75.000  
70.087  
6
7
8
9
800 ×600 35.156  
800 ×600 37.879  
800 ×600 48.077  
800 ×600 46.875  
56.250  
60.317  
72.188  
75.000  
8. Dead Pixel Policy  
Dead pixels on the TFT LCD panel are sometimes inevitable. ViewEra  
guarantees that the monitor will be replaced if the number of dead pixels  
on our monitor exceeds 5 pixels.  
9. Warranty and Service Information  
Warranty  
ViewEra warrants the V200T TFT-LCD TV monitor for three years for parts and  
labor, one year for LCD panel and back light from the date of purchase. For detail  
warranty information, please refer to our website.  
(http://www.viewera.com/warranty.htm)  
Service  
Contact your ViewEra retailer or ViewEra for after sale service.  
You may contact ViewEra Customer Support as below:  
1. By Mail: 328 Paseo Tesoro, Walnut, CA 91789  
2. By Telephone: (909)595-3748  
3. By Fax: (909)595-3526  
4. By E-mail: [email protected]  
The business hours are 9:00 am 6:00 pm PST, Mon Fri.  
Page 20  
 
10. Windows setup  
For the best view, please set up the monitor type in Windows as follows:  
Control Panel > Display > Settings > Advanced > List All Modes  
For 800 × 600, please set to SVGA 800×600 @60 Hz”  
Page 21  
 
11. Wall Mount Installation  
11.1 Remove the Base by un-installing the 4 screws and pull the Base from the  
Monitor.  
11.2 Install the Wall-mount kit by securing the 4 screws with the bracket pointing in  
downward direction as shown in the picture.  
11.3 Face the Wall mount metal bracket in accordance with the direction shown for  
proper mounting with the monitor.  
Page 22  
 

TDK Network Card EE320x250x20 User Manual
Thermo Products Furnace OH5 85DXE User Manual
Toshiba GPS Receiver HHGP1 User Manual
Toshiba Power Supply GX7 Series User Manual
Trane Air Conditioner TRG TRC003 EN User Manual
TRENDnet Network Hardware TEW648UB User Manual
Tricity Bendix Oven BS 621 2 User Manual
Viking Refrigerator VUAR154 User Manual
Viper Remote Starter VSM200 User Manual
Wagner SprayTech Impact Driver 290024 User Manual