Project
Quantity
Item #
Model Specified:
CSI Section 11400
"D-Width" Reach-In Refrigerator Models/
One & Two Section Models, 26" Deep
Self-Contained
1-Section Full Length Door Model
2-Section Full Length Door Model
1-Section Half Length Door Model
2-Section Half Length Door Model
RHT132DUT-FHS
RHT232DUT-FHS
RHT132DUT-HHS
RHT232DUT-HHS
R
SERIES
Stainless Exterior
& Interior
INTELA-TRAUL®
Equipped!
1-Section Full Length Door Model
2-Section Full Length Door Model
1-Section Half Length Door Model
2-Section Half Length Door Model
AHT132DUT-FHS
AHT232DUT-FHS
AHT132DUT-HHS
AHT232DUT-HHS
A
SERIES
Stainless Exterior,
Anodized
Aluminum Interior
The R &ASeries represent Traulsen's Top-of-the-Line product offering. The
“D-Width” reach-in refrigerator models are all designed to offer
maximum interior storage capacity within a narrow 24" or 48" footprint. Each
is supplied standard with such high quality features as balanced
refrigeration systems, microprocessor controls, communications ability and
stainless steel exteriors. Additionally, they offer the widest range of optional
accessories to choose from, and can be specified for use with many
different applications, including: Foodservice, Correctional, Institutional,
Export, etc.
Model RHT132DUT-FHS
(shown with optional casters)
Standard Product Features
Options & Accessories
•
•
•
•
•
•
•
•
•
•
•
R-Series: Stainless Steel Exterior & Interior
A-Series: Stainless Steel Exterior/Anodized Aluminum Interior
INTELA-TRAUL® Microprocessor Control System
Balanced, Self-Contained Refrigeration System Using R-134a
Scroll Blower Type Evaporator Fan
•
•
•
•
Stainless Steel Finished Back With Rear Louvers
Re-Hinging Feature For Door(s)
Additional Chrome Plated Shelves
No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"
or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans, Adjustable To 2" O.C.
Locking Hasps (padlocks supplied by others)
Export 220/50/1 Voltage
Biased Return Air Duct
•
Full or Half Length Stainless Steel Doors With Locks
Self-Closing Doors With Stay Open Feature At 120 Degrees
Guaranteed For Life Cam-Lift Hinges
Guaranteed For Life Horizontal Work Flow Door Handle
Standard Door Hinging: 132D = Right, 232D = Left/Right (other
hingings not available for two-section models)
Automatically Activated Incandescent Lights
Stainless Steel Breaker Caps
Three Chrome Plated Adjustable Shelves Per Section,
Supported On Shelf Pins (installed at the factory)
Automatic Non-Electric Condensate Evaporator
Magnetic Snap-In Door Gaskets
•
•
•
•
•
•
•
•
•
•
•
•
Stainless Steel Shelves In Lieu of Standard Chrome Plated
Kool Klad Exterior Laminate Decor
Set of Four (4) 6" High Casters In Lieu of Legs
Set of Four (4) 4-5/8" High Casters In Lieu of Legs
4-1/2" High Stainless Steel Base In Lieu of Legs
6" High Stainless Steel Kickplate (for use with standard legs)
Prison/Correctional Facilities Options
Remote Applications (see spec sheet 12-2 for more details)
Clear Glass Door(s) In Place Of One Or More Solid Door(s)
Two Year Service/Labor Warranty Available
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Gasket Protecting Metal Door Liner
Controllable Anti-Condensate Door Perimeter Heaters
Thermostatic Expansion Valve Metering Device
Stainless Steel One-Piece Louver Assembly
9' Cord & Plug Attached
Set of Four (4) 6" High Adjustable Stainless Steel Legs
One Year Parts And Labor Warranty
Two Year Control Warranty (parts and labor)
Five Year Compressor Warranty
Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.
Approval: ___________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
1-4
|